This contains the local FM repeaters on 2m/70cm plus FM calling, SO-50 and APRS. You can copy/paste and manage memories by adding/moving rows just like you would in an Excel spreadsheet – it’s a very flexible and powerful program.Ī complete UK Repeater CSV (over 800 GB3, GB7 and MB6/MB7 systems) which you load into CHIRP, courtesy of Ham Goodies: Download CHIRP CSV File here.Įssex Skills (aka M0PZT Basic) CSV which was offered to attendees of the past Danbury “Skills Nights”. There’s no “automatic repeater shift” on these Chinese radios so it’s best to have repeaters (whether they are 0.6MHz, 1.6MHz or 7.6MHz split) on a memory and with a name/callsign.ĬHIRP supports multiple tabs of frequency/memory lists which can be a simple CSV file or a radio “image”. This makes adding multiple repeater memories (and naming them) much easier and leaves the VFO Mode free for normal simplex working. For this, I’ve been using the free CHIRP software and a selection of programming cables. See channels 50 through 57 in the picture below.I’ve programmed a fair few handhelds in my time – Mostly Baofeng models but also some Yaesu FT-60s. It works and I don't know if you can do this without Chirp. For SO-50 the receive is in the 440 MHz, 70cm band and the transmit is in the 144 MHz, 2 meter band. I programmed 8 memories into the radio and have programmed the memories for crossband. It does work, but I am just careful with it.īTECH Programming Cable Memory Frequencies for SO-50 However Chirp doesn't have my specific model Baofeng, so that could be the problem. The problem I have with Chirp is it sending the radio into transmit. I use Chirp because I think it is easier then trying to program these radios manually. See: SMA FEMALE TO PL-259 PIGTAIL Programming Baofeng for SO-50

This takes the pressure off the small SMA connector on the radio. A short 3 to 6 ft piece of coax and a pigtail to connect to the radio. If you purchase an Elk antenna you'll need a couple of other things. It has full duplex and you will be able to work other FM birds with it. If you're going to go all out I suggest the Kenwood TH-D72A.

I have the BF-F9V2+, but many use the Baofeng UV-5R. Of course you'll need a radio and the one I am using and what many others use is a cheap Baofeng. See my article, Amateur Radio Satellite Elk Antenna. Equally as good, but a little more cumbersome. In my last article I showed off my Elk and how to put it together. I've been able to work SO-50, but probably couldn't do it without good programming and some help from others. Recently I purchased an Elk 2M/440L5 antenna for working satellites. Programming a Baofeng for SO-50 can be tricky, but it is a little easier with Chirp, a PC and cable. Working SO-50 with a Baofeng is a lot of fun.

Uv 82 baofeng chirp programming